Cleaning Your Audio Equipment

Most people think that once you have chosen your audio equipment and it is already plugged in, there is no need to do anything else, but to enjoy your favourite tracks. In fact, this is not precisely true. From time to time the equipment will require a little bit of care to keep it in good condition and working properly. It may sound like a complicated process, but in fact no special tools are needed and you can do everything by yourself. All you have to do is to spend less than an hour of your spare time.

Firstly, let’s take care for the contacts for your audio and video inputs. This should be done approximately twice a year . You will have to pull your gear out of the cabinet and then disconnect all of your RCA-style plugs that are used for the audio and video connections. Here is a little side note- the RCA plug is known also as “patch cables”. For this cleaning mission you will need a cotton swab that should be soaked with rubbing alcohol. Then rub it very gently on the jacks and plugs. Remember that the swab should be only a little damp, not dripping. By cleaning these connections you will help to avoid corrosion that can lead to bad quality signal.

Now, it is time to clean the equipment cases of dust and debris. According to professional cleaners such as cleaning experts from Gravesend this should be done once every few months or more often, if you live in dirty environment. The wand attachment of your vacuum will be appropriate for this purpose. Inspect carefully the air and fan vents. Take into consideration that blocked vents will effect the proper cooling of the system. Often there will be dust in small crevices that are too hard to reach. However, there is a simple solution- using compressed air is the right way to clean the area.

The face and the controls of the audio equipment can be cleaned with a damp rag. They will get dirty more often, so you will have to take care for them once in a few weeks. Before using any cleaning product, it is best first to check the instructions of the manufacturer to see what products and techniques can be used.